Cleaning

A variety of methods can be used to clean pavers. A leaf blower can remove leaves and grass clippings. A garden hose with spray nozzle can remove surface dirt. A stiff brush and a lot of elbow grease followed by the hose and spray nozzle can remove even more dirt. And homeowners can include a variety of cleaners. Hedberg Landscape and Masonry Supplies have 3 metro locations where you can find a full line of do it yourself spot and general cleaners available.  

What about the pressure washer? Most pressure washers available at the home improvement stores are over powered and under fed, resulting in pressures that can strip the Cream Coat off of new pavers and old. Finishing concrete and during the manufacture of pavers a Cream Coat forms on the top surface. The surface you see (including the color) hides what is below and that's a lot of small rocks (and not that much color).

The Paver Doctor recommends the use of hot water (160 degrees) low pressure (300-600 PSI) and high water volume (5-8 GPM) to clean pavers. Cleaners need proper dwell, agitation and rinse. The applications must be worked in two different directions. Glass, wood or metal siding, veneer stone or brick and stucco must be protected from acids based cleaners. Consideration of run off into planting beds, lawn and ultimately watersheds will direct what chemicals can be used. 

The key to cleaning stains is to do it quickly after it happens. Reactive  measures are much more successful when a proactive approach is taken. A sealant application will reduce stain absorption. Sealants are designed to prevent the penetration of contaminants including dust, dirt, oil that dull the colors of pavers. Regular maintenance cleanings become quick, easy and much less intrusive to the colorful Cream Coat.

Dirty soiled pavers are both an appearance issue and can affect the integrity of the paver by holding onto moisture which during freeze thaw periods can lead to spalling. Feel free to call The Paver Doctor to assess this or any other issues related to your pavers! We specialize in paver Repair-Restoration-Sealing.

Edge Restraint

Edge Restraint systems are responsible for rotational interlock of a paver application. Through interlock, thousands of pavers together will act as one continuous surface. Edge restraint failure will result in shifting/creeping of pavers leaving open joints which will result in bed sand loss leading to possible rutting or settlement. 

The desired outcome of an Edge Restraint is that it stays stationary. Understanding the degree of lateral forces that will be exerted on the system is critical to determining what type to use. With the correct Edge Restraint system in hand accurate installation is critical to its success. Trying to save money on shorter spikes or less of them can cause a failure. And setting spikes into the ground will not hold, they must be driven into base material.

The most common type of edge restraints are made of black PVC and set in place with spikes driven into the base material. On straight runs rigid Edge Restraints are preferred and flexible is used on curve-linear applications. 

Hedberg Landscape and Masonry Supplies (3 Metro locations) provide quality Edge Restraint systems. I have yet to find comparable products at the big box stores. 

Replacing Edge Restraint systems begins with identifying the underlying issue and correcting it. Repairing the damage created by the failure will become more involved the longer the failure exists. If you feel this condition may exist on your paver application feel free to contact The Paver Doctor. We specialize in paver Repair-Restoration-Sealing.